Extreme Dog Fence Manual⁚ A Comprehensive Guide
This manual is your comprehensive guide to the eXtreme Dog Fence system, a proven safe and effective solution for containing and training dogs weighing between 40 and 180 pounds. From understanding the system’s components to the installation process, programming the collar receiver, and training your dog, this manual provides detailed instructions to ensure a successful and safe experience for both you and your furry friend.
Introduction
Welcome to the world of eXtreme Dog Fence, a revolutionary system designed to provide a safe and effective way to contain your dog within your property boundaries. This manual is your comprehensive guide to understanding, installing, and utilizing the eXtreme Dog Fence system to ensure the safety and well-being of your dog while giving you peace of mind. The eXtreme Dog Fence system is a wireless, in-ground fence that uses a series of buried wires to create a perimeter around your property. The collar receiver worn by your dog emits a safe and audible warning signal when the dog approaches the boundary line. This system is designed to be both humane and effective, allowing your dog to enjoy the freedom of your yard while remaining safely confined within the designated area.
Whether you have a playful puppy or a seasoned senior dog, the eXtreme Dog Fence system can provide the perfect solution for keeping your dog safe and secure. This manual will walk you through every step of the process, from installation to training and troubleshooting. By following the instructions carefully, you can set up and operate your eXtreme Dog Fence system with ease and confidence. Get ready to provide your dog with the freedom and security they deserve, all while enjoying the peace of mind that comes with knowing your furry companion is safely contained within your property.
Understanding the Extreme Dog Fence System
The eXtreme Dog Fence system operates on the principle of radio waves and a combination of electronic components. It consists of three primary elements⁚ the buried wire, the transmitter, and the collar receiver. The buried wire acts as a boundary line, emitting a radio signal that extends a certain distance outward. The transmitter, usually mounted on a wall inside your home, provides power to the buried wire and controls the signal strength. The collar receiver, worn by your dog, picks up the radio signal from the buried wire. When your dog approaches the boundary line, the collar receiver detects the signal and delivers a safe and audible warning, typically a tone and/or a static shock, to deter the dog from crossing the boundary.
The eXtreme Dog Fence system is designed to be customizable to your specific needs. You can adjust the signal strength of the transmitter to suit the size of your property and the level of stimulation delivered by the collar receiver to suit your dog’s temperament and sensitivity. The system also offers various levels of stimulation, allowing you to choose the appropriate setting for your dog. This flexibility ensures that the eXtreme Dog Fence system can be tailored to meet the individual needs of both you and your dog.
Installation Process
The installation process for the eXtreme Dog Fence system involves several steps to ensure proper functionality and safety. First, you’ll need to determine the boundaries of your desired containment area and mark them with flags or stakes. Next, you’ll carefully bury the wire along the marked boundary line, ensuring a consistent depth of 1 to 3 inches for the standard grade package, or 3 to 24 inches if burying the wire. It’s essential to avoid burying the wire too deep, as this can affect signal strength and potentially interfere with other buried utilities.
Once the wire is buried, you’ll need to connect it to the transmitter, which is typically mounted on a wall inside your home. The transmitter provides power to the wire and controls the signal strength. Finally, you’ll need to install the collar receiver on your dog’s collar and program it to the appropriate stimulation level. The installation process is relatively straightforward and can be completed by most homeowners, but if you have any doubts or concerns, you can always contact the eXtreme Dog Fence customer support for assistance.
Programming the Collar Receiver
Programming the collar receiver is a crucial step in setting up your eXtreme Dog Fence system. The process involves customizing the receiver’s stimulation level to suit your dog’s size, temperament, and sensitivity. Start by holding the receiver close to the wall-mounted transmitter. The receiver’s light will illuminate, indicating it’s ready for programming. Press and release the “SET” button on the transmitter, and the receiver’s light will flash a number corresponding to the selected stimulation level.
You’ll typically find multiple stimulation levels, starting with a low level for sensitive dogs and increasing to higher levels for larger or more stubborn dogs. It’s recommended to begin with the lowest level and gradually increase it as needed, always paying close attention to your dog’s reaction. The goal is to find a level that effectively discourages your dog from crossing the boundary without causing discomfort or pain. Always consult your dog’s veterinarian if you have any concerns about the stimulation levels or your dog’s overall well-being.
Training Your Dog
Training your dog to understand and respect the boundaries set by the eXtreme Dog Fence is essential for a safe and effective system. This process typically takes approximately two weeks, with the majority of that time dedicated to close supervision to ensure compliance. Start by introducing your dog to the collar receiver gradually, allowing them to become accustomed to the sensation and sound. Once your dog is comfortable with the collar, begin walking them along the fence line, gradually encouraging them to approach the boundary.
As your dog approaches the boundary, they will receive a warning signal from the collar receiver. This signal should be enough to deter them from crossing. If they do cross, the receiver will deliver a mild correction, teaching them to avoid the boundary. It’s important to remain calm and patient throughout the training process, using positive reinforcement like treats and praise to reward good behavior. Consistency is key; ensure that you are consistently reinforcing the boundaries and providing clear signals to your dog. With patience and positive reinforcement, your dog will learn to respect the boundaries of the fence and enjoy the freedom of a safe and secure yard.
Troubleshooting and Maintenance
While the eXtreme Dog Fence is designed for reliability, occasional issues may arise. If you notice any irregularities in the system’s operation, it’s important to address them promptly to ensure continued safety and effectiveness. Begin by checking the battery levels in both the collar receiver and the wall mount transmitter. Low batteries can significantly impact signal strength and effectiveness. Also, inspect the wiring for any damage, breaks, or loose connections. Ensure the wire is buried at the appropriate depth, as burying it too deep can interfere with signal strength.
If you’re experiencing problems with the collar receiver, ensure it’s securely fastened to your dog’s collar and that the contact points are clean. A dirty or worn-out contact point can hinder the signal transmission. If you’ve checked these basic troubleshooting steps and are still experiencing issues, consult the user manual for more detailed troubleshooting instructions; Regular maintenance is also essential for the long-term performance of your eXtreme Dog Fence. Periodically check the battery levels and replace them as needed. Clean the contact points on the collar receiver to ensure optimal signal transmission. With regular maintenance and proactive troubleshooting, you can ensure your eXtreme Dog Fence continues to operate effectively and safely.
Safety and Precautions
While the eXtreme Dog Fence system is designed for safety and effectiveness, it’s crucial to adhere to certain precautions to ensure the well-being of your dog. Always supervise your dog during the initial training phase. The goal is to teach your dog to respect the boundaries of the fence, not to punish them. Avoid using the system on dogs that are prone to chewing or biting, as they might damage the collar receiver. Regularly inspect the collar receiver for any signs of wear or damage. If you notice any issues, replace the collar receiver immediately;
Never use the eXtreme Dog Fence system on dogs with medical conditions or those who are pregnant. Always consult with your veterinarian before using any electronic training devices on your dog. The eXtreme Dog Fence system is not a substitute for proper training and socialization. It’s essential to continue to train and socialize your dog to ensure their overall well-being and obedience. Remember, your dog’s safety and well-being should always be your top priority. By following these precautions and using the system responsibly, you can ensure a safe and effective experience for both you and your furry companion.
Frequently Asked Questions
Here are some common questions about the eXtreme Dog Fence system⁚
- How do I connect the extreme dog fence collar? The collar receiver connects to a collar with a buckle or strap, just like any other dog collar. Make sure it’s securely fastened to prevent the receiver from slipping off.
- How does an extreme dog fence work? The system utilizes a buried wire that emits a radio signal. The collar receiver detects this signal and sends a correction signal to the dog if they approach the boundary. This correction is usually a mild, but effective, static shock.
- What is the difference between the Standard Grade and PRO GRADE packages? The PRO GRADE package covers a larger area (up to 10 acres) and features updated electronics with 3 antennas and improved battery life.
- Can I use the eXtreme Dog Fence system on multiple dogs? Yes, you can use it on multiple dogs as long as you have a separate collar receiver for each.
- How do I troubleshoot problems with the eXtreme Dog Fence system? Check the battery levels in both the collar receiver and the wall transmitter. Ensure the wire is properly buried and that the signal is strong enough to reach the boundaries. If you encounter further issues, refer to the troubleshooting section in this manual or contact customer support.
If you have any other questions, please refer to this manual or contact our customer support team for assistance.
The eXtreme Dog Fence system offers a safe, effective, and humane solution for keeping your dog securely within your designated boundaries. By following the instructions outlined in this manual, you can ensure a successful installation, proper programming, and effective training for your furry friend. Remember, consistent training is key to helping your dog understand and respect the boundaries set by the system.
With the eXtreme Dog Fence system, you can have peace of mind knowing that your dog is safe and contained within your property while enjoying the freedom to explore your yard.
For any further assistance or clarification, please feel free to contact our customer support team. We are here to help you make the most of your eXtreme Dog Fence system.